Eligibility criteria

 

Nationality / citizenship:

  1. A candidate must be either:

(a) A citizen of India, or

(b) A subject of Nepal, or

(c) A subject of Bhutan, or

(d) A Tibetan refugee who came over to India before the 1st January 1962 with the intention of permanently settling in India, or

(e) a person of Indian origin who has migrated from Pakistan, Burma, Sri Lanka, East African countries of Kenya, Uganda, the United Republic of Tanzania (Formerly Tanganyika and Zanzibar), Zambia, Malawi, Zaire, Ethiopia and Vietnam with the intention of permanently setting in India.

  1. Provided that a candidate belonging to categories (b), (c), (d) and (e) above shall be a person in whose favour a certificate of eligibility has been issued by the Government of India.
  2. A candidate in whose case a certificate of eligibility is necessary may be admitted to the examination but the offer of appointment will be given only after the necessary eligibility certificate has been issued to him/ her by the Government of India.

Age Limit:

 Age limit for the posts of Junior Engineers in various Ministries/ Departments/ Organizations as

Sr.No

Organization

Post

Age limit

 

1

Central Water Commission

Junior Engineer (Civil)

Up to 32 years

2

Central Public Works Department (CPWD)

Junior Engineer (Civil)

Up to 32 years

3

Military Engineer Services (MES)

Junior Engineer (Civil)

Up to 30 years

4

Farakka Barrage Project

Junior Engineer (Civil)

Up to 30 years

5

Border Road Organization

Junior Engineer (Civil)

Up to 30 years

6

Central Water and Power Research

Station

Junior Engineer (Civil)

Up to 30 years

7

National Technical Research

Organization (NTRO)

Junior Engineer (Civil)

Up to 30 years

Permissible relaxation in upper age limit prescribed under is as follows:

Sr. No.

Category

Age-relaxation permissible

beyond the upper age limit

01

SC/ ST

5 years

02

OBC

3 years

03

Persons with Disabilities (PwD)

10 years

04

PwD + OBC

13 years

05

PwD + SC/ ST

15 years

06

Ex-Servicemen (ESM)

3 years after deduction of the military service rendered from the actual age.

07

Candidates who had ordinarily been domiciled in the State of Jammu & Kashmir during the period from 01-01-1980 to 31-12-1989.

5 years

08

Defence Personnel disabled in operation during hostilities with any foreign country or in a disturbed area and released as a consequence thereof.

3 years

09

Defence Personnel disabled in operation during hostilities with any foreign country or in a disturbed area and released as a consequence thereof (SC/ ST).

8 years

 

Essential Educational Qualifications/ Experience

Sr.No

Post

Educational and Other Qualification

1

Junior Engineer (Civil),

Central Water Commission.

Degree or Diploma in Civil Engineering from a recognized University or Institution.

2

Junior Engineer (Civil),

CPWD

Diploma in Civil Engineering from a recognized

University or Institute

3

Junior Engineer (Civil),

MES

Degree in Civil Engineering from a recognized University

Or

(a) Three years Diploma in Civil Engineering from a recognized Institute or University or Board; and

(b) Two years experience in Planning, Execution and Maintenance of Civil Engineering works.

4

Junior Engineer (Civil), Farakka Barrage Project.

Diploma in Civil Engineering from a recognized University or Institute or Board.

5

Junior Engineer (Civil),

Border Roads Organization, Ministry of Defence.

Degree in Civil Engineering from a recognized University/ Institute

or

(a) Three years Diploma in Civil Engineering from a recognized University/ Institute/ Board; and

(b) Two years working experience in Planning/ Execution/ Maintenance of Civil Engineering works.

6

Junior Engineer (Civil),

Central Water Power Research Station.

Diploma in Civil Engineering from a recognized

Institute.


SSC-JE Exam Pattern

 

Papers

Mode of Examination

Subject(s)

Maximum Marks & No of Questions

Paper – I
Objective Type

Computer-based Test

General Intelligence & Reasoning

50
(50 Questions )

General Awareness

50
(50 Questions )

Part A – General Engineering (CIVIL & STRUCTURAL)
OR

100
(100 Questions)

Part B – General Engineering (ELECTRICAL)
OR

Part C – General Engineering (MECHANICAL)

Paper – II
Conventional Type

Written Exam

Part A – General Engineering (CIVIL & STRUCTURAL)
OR

300

Part B – General Engineering (ELECTRICAL)
OR

Part C – General Engineering (MECHANICAL)
OR

 

Syllabus

Paper-I Syllabus
(i) General Intelligence & Reasoning

The Syllabus for General Intelligence would include questions of both verbal and non-verbal type. The test may include questions on analogies, similarities, differences, space visualization, problem solving, analysis, judgement, decision making, visual memory, discrimination, observation, relationship concepts, arithmetical reasoning, verbal and figure classification, arithmetical number series, etc. The test will also include questions designed to test the candidate’s abilities to deal with abstract ideas and symbols and their relationships, arithmetical computations and other analytical functions.

(ii) General Awareness

Questions will be aimed at testing the candidate’s general awareness of the environment around him/her and its application to society. Questions will also be designed to test knowledge of current events and of such matters of everyday observations and experience in their scientific aspect as may be expected of any educated person. The test will also include questions relating to India and its neighboring countries especially pertaining to History, Culture, Geography, Economic Scene, General Polity and Scientific Research, etc. These questions will be such that they do not require a special study of any discipline.

(iii) General Engineering (Civil and Structural)
Part A – Civil Engineering

Building Materials, Estimating, Costing and Valuation, Surveying, Soil Mechanics, Hydraulics, Irrigation Engineering, Transportation Engineering, Environmental Engineering.

Structural Engineering: Theory of Structures, Concrete Technology, RCC Design, Steel Design.

Paper-II Syllabus
Part-A: Civil & Structural Engineering
CIVIL ENGINEERING

Building Materials: Physical and Chemical properties, classification, standard tests, uses and manufacture/quarrying of materials e.g. building stones, silicate based materials, cement (Portland), asbestos products, timber and wood based products, laminates, bituminous materials, paints, varnishes.

Estimating, Costing and Valuation: estimate, glossary of technical terms, analysis of rates, methods and unit of measurement, Items of work – earthwork, Brick work (Modular & Traditional bricks), RCC work, Shuttering, Timber work, Painting, Flooring and Plastering. Boundary wall, Brick building, Water Tank, Septic tank, Bar bending schedule, Centre line method, Mid-section formula, Trapezoidal formula, Simpson’s rule. Cost estimate of Septic tank, flexible pavements, Tube well, isolates and combined footings, Steel Truss, Piles and pile-caps. Valuation – Value and cost, scrap value, salvage value, assessed value, sinking fund, depreciation and obsolescence, methods of valuation.

Surveying: Principles of surveying, measurement of distance, chain surveying, working of prismatic compass, compass traversing, bearings, local attraction, plane table surveying, theodolite traversing, adjustment of theodolite, Levelling, Definition of terms used in levelling, contouring, curvature and refraction corrections, temporary and permanent adjustments of dumpy level, methods of contouring, uses of contour map, tachometric survey, curve setting, earth work calculation, advanced surveying equipment.

Soil Mechanics: Origin of soil, phase diagram, Definitions-void ratio, porosity, degree of saturation, water content, specific gravity of soil grains, unit weights, density index and interrelationship of different parameters, Grain size distribution curves and their uses. Index properties of soils, Atterberg’s limits, ISI soil classification and plasticity chart. Permeability of soil, coefficient of permeability, determination of coefficient of permeability, Unconfined and confined aquifers, effective stress, quick sand, consolidation of soils, Principles of consolidation, degree of consolidation, pre-consolidation pressure, normally consolidated soil, e-log p curve, computation of ultimate settlement. Shear strength of soils, direct shear test, Vane shear test,  Tri-axial test. Soil compaction, Laboratory compaction test, Maximum dry density and optimum moisture content, earth pressure theories, active and passive earth pressures, Bearing capacity of soils, plate load test, standard penetration test.

Hydraulics: Fluid properties, hydrostatics, measurements of flow, Bernoulli’s theorem and its application, flow through pipes, flow in open channels, weirs, flumes, spillways, pumps and turbines.

Irrigation Engineering: Definition, necessity, benefits, ill effects of irrigation, types and methods of irrigation, Hydrology – Measurement of rainfall, run off coefficient, rain gauge, losses from precipitation – evaporation, infiltration, etc. Water requirement of crops, duty, delta and base period, Kharif and Rabi Crops, Command area, Time factor, Crop ratio, Overlap allowance, Irrigation efficiencies. Different type of canals, types of canal irrigation, loss of water in canals. Canal lining – types and advantages. Shallow and deep to wells, yield from a well. Weir and barrage, Failure of weirs and permeable foundation, Slit and Scour, Kennedy’s theory of critical velocity. Lacey’s theory of uniform flow. Definition of flood, causes and effects, methods of flood control, water logging, preventive measure. Land reclamation, Characteristics of affecting fertility of soils, purposes, methods, description of land and reclamation processes. Major irrigation projects in India.

Transportation Engineering: Highway Engineering – cross sectional elements, geometric design, types of pavements, pavement materials – aggregates and bitumen, different tests, Design of flexible and rigid pavements – Water Bound Macadam (WBM) and Wet Mix Macadam (WMM), Gravel Road, Bituminous construction, Rigid pavement joint, pavement maintenance, Highway drainage, Railway Engineering- Components of permanent way – sleepers, ballast, fixtures and fastening, track geometry, points and crossings, track junction, stations and yards. Traffic Engineering – Different traffic survey, speed-flow-density and their interrelationships, intersections and interchanges, traffic signals, traffic operation, traffic signs and markings, road safety.

Environmental Engineering: Quality of water, source of water supply, purification of water, distribution of water, need of sanitation, sewerage systems, circular sewer, oval sewer, sewer appurtenances, sewage treatments. Surface water drainage. Solid waste management – types, effects, engineered management system. Air pollution – pollutants, causes, effects, control. Noise pollution – cause, health effects, control.

STRUCTURAL ENGINEERING

Theory of structures: Elasticity constants, types of beams – determinate and indeterminate, bending moment and shear force diagrams of simply supported, cantilever and over hanging beams. Moment of area and moment of inertia for rectangular & circular sections, bending moment and shear stress for tee, channel and compound sections, chimneys, dams and retaining walls, eccentric loads, slope deflection of simply supported and cantilever beams, critical load and columns, Torsion of circular section.

Concrete Technology: Properties, Advantages and uses of concrete, cement aggregates, importance of water quality, water cement ratio, workability, mix design, storage, batching, mixing, placement, compaction, finishing and curing of concrete, quality control of concrete, hot weather and cold weather concreting, repair and maintenance of concrete structures.

RCC Design: RCC beams-flexural strength, shear strength, bond strength, design of singly reinforced and double reinforced beams, cantilever beams. T-beams, lintels. One way and two way slabs, isolated footings. Reinforced brick works, columns, staircases, retaining wall, water tanks (RCC design questions may be based on both Limit State and Working Stress methods).

Steel Design: Steel design and construction of steel columns, beams roof trusses plate girders.